The Edmar Abrasive Company

Untitled Document
Diamond Core Bits



Wet Cutting


KK-P
Click for larger image

Premium - Laser Welded
KK-P Gray - An excellent general purpose core bit with 12mm high segments for drilling a wide range of masonry and concrete mtrls. including concrete with soft to hard aggregates and light steel reinforcing. Extremely fast drilling (30- 35% diam. conc.). Standard drilling depth is now 18 in. in most sizes. Competitors bits are normally only 14 in. Longer tubes/barrels are available up to 24 in. by special request.

Size
(Dia. x Thickness x Arbor)
Segment
Hgt.
Rim Hgt. Landings Spec Part # Quantity
Requested
Add to Order*
2 x .145 x 1 1/4 - 7 12mm -- 5 KK-P 11023
2 1/2 x .145 x 1 1/4 - 7 12mm -- 6 KK-P 11025
2 1/4 x .145 x 1 1/4 - 7 12mm -- 5 KK-P 11024
3 x .145 x 1 1/4 - 7 12mm -- 7 KK-P 11027
3 1/2 x .145 x 1 1/4 - 7 12mm -- 8 KK-P 11029
4 x .145 x 1 1/4 - 7 12mm -- 9 KK-P 11030
4 1/2 x .145 x 1 1/4 - 7 12mm -- 10 KK-P 11032
4 1/4 x .145 x 1 1/4 - 7 12mm -- 9 KK-P 11031
5 x .145 x 1 1/4 - 7 12mm -- 11 KK-P 11033
5 1/2 x .160 x 1 1/4 - 7 12mm -- 12 KK-P 11035
6 x .160 x 1 1/4 - 7 12mm -- 13 KK-P 11036
6 1/4 x .160 x 1 1/4 - 7 12mm -- 13 KK-P 11037
7 x .180 x 1 1/4 - 7 12mm -- 14 KK-P 11039
8 x .180 x 1 1/4 - 7 12mm -- 16 KK-P 11040
9 x .195 x 1 1/4 - 7 12mm -- 18 KK-P 11041
10 x .195 x 1 1/4 - 7 12mm -- 20 KK-P 11042
11 x .195 x 1 1/4 - 7 12mm -- 20 KK-P 11043
12 x .195 x 1 1/4 - 7 12mm -- 24 KK-P 11044
14 x .195 x 1 1/4 - 7 12mm -- 24 KK-P 11045
 

KK-S
Click for larger image

Super - Laser Welded
KK-S BLUE - Higher diamond conc. and 12mm segment height leads to good speed and longer life on hydraulic drills or electric drills with at least 15 amps. General purpose but also concrete with medium-hard to hard aggregates and med-heavy re-bar. (40-43% diam conc.). Standard drilling depth is 18 in. in most sizes. Competitors' bits are normally only 14 in. Longer tubes/barrels are available up to 24 in. by special request.

Size
(Dia. x Thickness x Arbor)
Segment
Hgt.
Rim Hgt. Landings Spec Part # Quantity
Requested
Add to Order*
1/2 x .140 x 5/8-11 10 mm -- -- KK-S 11061
3/4 x .140 x 5/8-11 10 mm -- -- KK-S 11063
5/8 x .140 x 5/8-11 10 mm -- -- KK-S 11062
7/8 x .140 x 5/8-11 10 mm -- -- KK-S 11064
1 x .140 x 5/8-11 10 mm -- -- KK-S 11065
1 1/2 x .140 x 5/8-11 10 mm -- -- KK-S 11069
1 1/4 x .140 x 5/8-11 10 mm -- -- KK-S 11067
1 1/8 x .140 x 5/8-11 10 mm -- -- KK-S 11066
1 3/4 x .140 x 1 1/4 - 7 10 mm -- -- KK-S 11071
1 3/8 x .140 x 5/8-11 10 mm -- -- KK-S 11068
1 5/8 x .140 x 1 1/4 - 7 10 mm -- -- KK-S 11070
2 x .145 x 1 1/4 - 7 12mm -- 5 KK-S 11073
2 1/2 x .145 x 1 1/4 - 7 12mm -- 6 KK-S 11075
2 1/4 x .145 x 1 1/4 - 7 12mm -- 5 KK-S 11074
3 x .160 x 1 1/4 - 7 12mm -- 7 KK-S 11077
3 1/2 x .160 x 1 1/4 - 7 12mm -- 8 KK-S 11079
4 x .160 x 1 1/4 - 7 12mm -- 9 KK-S 11080
4 1/2 x .160 x 1 1/4 - 7 12mm -- 10 KK-S 11082
4 1/4 x .160 x 1 1/4 - 7 12mm -- 9 KK-S 11081
5 x .160 x 1 1/4 - 7 12mm -- 11 KK-S 11083
5 1/2 x .160 x 1 1/4 - 7 12mm -- 12 KK-S 11085
6 x .160 x 1 1/4 - 7 12mm -- 13 KK-S 11086
6 1/4 x .160 x 1 1/4 - 7 12mm -- 13 KK-S 11087
7 x .180 x 1 1/4 - 7 12mm -- 14 KK-S 11089
8 x .180 x 1 1/4 - 7 12mm -- 16 KK-S 11090
9 x .195 x 1 1/4 - 7 12mm -- 18 KK-S 11091
10 x .195 x 1 1/4 - 7 12mm -- 20 KK-S 11092
11 x .195 x 1 1/4 - 7 12mm -- 20 KK-S 11093
12 x .195 x 1 1/4 - 7 12mm -- 24 KK-S 11094
14 x .195 x 1 1/4 - 7 12mm -- 24 KK-S 11095
 

KK-SP
Click for larger image

Super- Prestressed & Precast Con
KK-SP Gold has a new segment and barrel designed specifically for prestressed concrete or concrete with stressed rebar. The segments are thicker but each bit has more segments and tighter gaps to withstand unraveling of the tensioned wire when cut. The turbo segmented design has a 10mm high segment that is laser welded to the tube. Standard drilling depth is 14 inches.

Size
(Dia. x Thickness x Arbor)
Segment
Hgt.
Rim Hgt. Landings Spec Part # Quantity
Requested
Add to Order*
2 x .170 x 1 1/4-7 10 mm -- -- KK-SP 11123
2 1/2 x .170 x 1 1/4-7 10 mm -- -- KK-SP 11125
3 x .170 x 1 1/4-7 10 mm -- 8 KK-SP 11127
3 1/2 x .170 x 1 1/4-7 10 mm -- 9 KK-SP 11129
4 x .170 x 1 1/4-7 10 mm -- 11 KK-SP 11130
4 1/2 x .170 x 1 1/4-7 10 mm -- 12 KK-SP 11132
5 x .170 x 1 1/4-7 10 mm -- 13 KK-SP 11133
6 x .170 x 1 1/4-7 10 mm -- 16 KK-SP 11136
 
 
*Fill the quantity desired for a part and click the ADD button directly to the right of that part.  Ordering requires registering.

THE EDMAR ABRASIVE COMPANY • P.O.Box 217 • 1107 Sussex Blvd. • Broomall, PA 19008 • (610) 544-4900 • (800) 550-8800